320leds 480leds COB Strip LED Light Bar 12V 24V Warm White Red Mars Green Ice Blue Golden Yellow Pink Home Soft LED Light Strip
Product Data:
【1】. LED Quantity:
320LEDs/meter, 480LEDs/meter.
【2】. SMD type: COB
【3】. LED Strip Size:
Width : 8mm .
Length of LED light strip: 1 meters / 2 meters / 3 meters / 5 meters / 10 meters
【4】. Input voltage: DC 12V / DC 24V.
【5】. Light Color:
3000K – Warm White, 4000K – Neutral White,6500K – White (Or Cold White).Red, Green, Blue, Ice Blue,Golden Yellow,Pink,Mars Green.
The light strip only emits a single type of light,
Please choose according to your needs.
【6】. Protection Rate: Non-waterproof (IP20).
【7】. Power per meter:
Power of 320LEDs/m LED light strip: 7-9 Watt/meter ;
Power of 480LEDs/m LED light strip: 8-11 Watt/meter .
【8】. Beam angle: 180°.
【9】. Working Temperature: -20° to 50°
【10】. This product is just an LED strip, it does not include any controllers, connectors, dimmers, or driver power supplies
【11】. There is double-sided tape on the back of the LED light strip, Which is very sticky and can be freely pasted where you want to paste.
【12】. The cutting distance of 12V LED strip is 25mm, and that of 24V LED strip is 50mm.
【13】. The LED strip must be connected to the voltage DC12V or DC24V corresponding to the LED strip. or the LED strip will be burnt out.
【14】. This LED strip can only be used after being connected to the city voltage by purchasing additional transformers. If you do not know how to select the power of the transformer, please contact us, and we can tell you how to select the power of the power supply.
Power selection for driving power supply:
1 meter light strip: It is recommended to use a driver power supply with a power greater than 20 watts.
2-meter light strip: It is recommended to use a driver power supply with a power greater than 40 watts.
3-meter light strip: It is recommended to use a driver power supply with a power greater than 48 watts.
5-meter light strip: It is recommended to use a driver power supply with a power greater than 60 watts.
10 meter light strip: It is recommended to use a driver power supply with a power greater than 120 watts.
【15】. This 24V-10 meters LED strip can only be driven by a driving power supply of more than 150W. The higher the power of the driving power supply, the better. (The product itself does not include any controller, connector or power supply)
【16】. When the LED strip flickers intermittently, it indicates that the power of the drive power used for the LED strip is insufficient, and the drive power with higher power needs to be replaced.
【17】.
A light strip with a length of 1 meter, 2 meters, and 3 meters, with only one input line (red and black).
A light strip with a length of 5 or 10 meters has red and black wires at both ends. During testing and installation, it is recommended that you connect both the red and black wires at both ends of the LED light strip to the driver power supply. This way, the power of the LED light strip will be higher. If only one end of the wire is connected, the brightness of the light strip will be reduced.































If you need a driver power supply,Please take a look at this one below




































































