HSA015（TG）Series
Handheld Spectrum Analyzer
+ Frequency Range from 9 kHz up to1.5 GHz
+ -160dBm Displayed Average Noise Level
+ Phase Noise -82dBc/Hz @1Gz and offset at 10KHz
+ Total Amplitude Accuracy <1.5dB
+ 10Hz Minimum Resolution Bandwidth (RBW)
+ EMI Pre-compliance Test Kit
+ Up to 1.5 GHz Tracking Generator Kit
+ 8 inches touchscreen display
＋Performance Specifications
|
Model |
HSA015（TG） |
|
Frequency |
|
|
Range |
9kHz-1.5 GHz |
|
Resolution |
1Hz |
|
Frequency span |
|
|
Range |
0 Hz，100 Hz to maximum frequency of device |
|
Accuracy |
± span /（swept points -1） |
|
Internal reference |
|
|
Reference frequency |
10.000000 MHz |
|
Reference frequency accuracy |
±[（days from last calibrate × freq aging rate）+ temperature stability + initial accuracy ] |
|
Temperature stability |
<2.5ppm （15℃ to 35℃） |
|
Aging rate |
<1ppm/year |
|
Readout |
|
|
Marker frequency resolution |
span/（the number of sweep points -1） |
|
Uncertainty |
±（freq indication × freq reference uncertainty +1%× span +10%× resolution bandwidth + Marker Frequency Resolution） |
|
Frequency counter |
|
|
Resolution |
1 Hz，10 Hz，100 Hz，1 kHz |
|
Accuracy |
±（marker freq × freq reference uncertainty + counter resolution） |
|
Bandwidth |
|
|
Resolution bandwidth (-3 dB) |
10 Hz to 500 kHz (1-10 steps by sequence), 1 MHz, 3 MHz |
|
Resolution Filter Shape Factor (60 dB : 3 dB) |
<5: 1 typical (digital and close to Gaussian shape) |
|
Accuracy |
|
|
Video bandwidth (-3 dB) |
10Hz to 3MHz |
|
Amplitude Specification |
|
|
Amplitude and electric level |
|
|
Amplitude measurement range |
DANL to +20 dBm， close the preamplifier |
|
Reference electric level |
-80 dBm to +30 dBm，0.1dBm steps |
|
Preamp |
20 dB, nominal, 9 kHz to 3.6 GHz |
|
Input attenuator range |
0 to 40 dB, in 1 dB step |
|
Max input DC voltage |
50 VDC |
|
Max continuous power |
+30dBm, average continuous power |
|
Displayed average noise level（DANL）(Input Attenuation= 0 dB, Sample Detector ,Trace Average ≥20, 20℃ to 30℃,Input Impedance=50 Ω ,RBW normalizes to 1Hz) |
|
|
Preamp off |
1 MHz~1GHz -140 dBm (Typical), <-130 dBm |
|
1GHz~1.5 GHz -138 dBm(Typical), <-128 dBm |
|
|
Preamp on |
1 MHz~1GHz -160 dBm (Typical), <-150 dBm |
|
1GHz~1.5 GHz -158 dBm (Typical), <-148 dBm |
|
|
SSB Phase Noise (20℃ to 30℃,fc=1 GHz, RBW=1 kHz,VBW=1 kHz) |
|
|
Phase noise |
<-80 dBc/Hz @10 kHz offset |
|
<-100 dBc/Hz @100 kHz offset |
|
|
<-107 dBc/Hz @1 MHz offset |
|
|
Level display range |
|
|
Log scale coordinate |
1dB ~255dB |
|
Linear scale coordinate |
0 to reference level |
|
level unit |
dBm, dBuW, dBpW, dBmV, dBuV, W,V |
|
Points |
201~1001 |
|
Number of traces |
5 |
|
Detectors |
Positive-peak, negative-peak, sample, normal, RMS,AVG, QualPeak |
|
Trace functions |
Clear write, Max Hold, Min Hold, View, Blank, Average |
|
Frequency response (20℃ to 30℃, 30% to 70% relative humidity, input attenuation=21 dB, reference frequency=50 MHz) |
|
|
Preamp Off (fc≥100K) |
±0.8 dB；±0.4 dB (Typical) |
|
Preamp On (fc≥1 MHz) |
±0.9 dB；±0.5 dB (Typical) |
|
Difference and Accuracy |
|
|
RBW Switch Difference |
RBW=10 kHz, Log resolution=±0.2 dB, Lin resolution=±0.01. Nominal |
|
Input Attenuation Difference |
20℃ ~30℃, fc=50 MHz, Preamplifier Off, 10 dB RF attenuation, input signal 1~40dB ±0.5 dB |
|
Absolute Amplitude Uncertainty |
20℃ to 30℃, fc=50 MHz, Span=200 kHz, RBW=10 kHz, VBW=10 kHz, peak detector,10 dB RF attenuation,95% confidence level Preamp Off ±0.4 dB, input signal level -20 dBm Preamp On ±0.5 dB, input signal level -40 dBm |
|
Uncertainty |
input signal range 0dbm~-50dbm |
|
±1.5 dB |
|
|
VSWR |
input 10 dB RF attenuation，1 MHz~1.5GHz |
|
<1.5，nominal |
|
|
Distortion and spurious response |
|
|
Second harmonic distortion |
fc ≥ 50 MHz，Preamp off, signal input -30 dBm, 0 dB RF attenuation, 20 ℃ to 30 ℃ |
|
-65dbc |
|
|
Third-order intermodulation |
fc ≥ 50 MHz |
|
+10 dBm |
|
|
1 dB Gain Compression |
fc ≥ 50 MHz, 0 dB RF attenuation, Preamp off , 20℃ to 30℃ |
|
>+2 dBm, nominal |
|
|
Residual response |
connect 50 Ω load at input port, 0 dB input attenuation, 20℃ to 30℃ |
|
<-85 dBm, typical |
|
|
Input related spurious |
-30 dBm signal at input mixer, 20℃ to 30℃ |
|
<-60 dBc |
|
|
Sweep time and triggering |
|
|
Sweep Time |
100Hz≤SPAN≤3GHz 10ms to 3000s zero sweep width 10ms to 3000s |
|
Mode |
Continue, single |
|
Tracking generator |
|
|
Output frequency range |
100 kHz~1.5GHz |
|
Output power level range |
-30 dBm~0 dBm |
|
Output power level resolution |
1dB |
|
Output flatness |
± 3 dB |
|
Maximum safe reverse level |
Average total power：± 30 dBm，DC : ±50 VDC |
|
Audio Demodulation |
|
|
Frequency Range |
100 kHz to 1.5 GHz |
|
Demodulat-ion Type |
FM/AM |
|
AM Measurement |
|
|
Frequency Range |
100 kHz to 1.5 GHz |
|
Modulation rate |
20 Hz to 100 kHz |
|
Modulation Rate Accuracy |
1Hz, nominal <0.1% modulation rate, nominal (Modulation rate ≥ 1 kHz) |
|
Depth |
5% to 95% |
|
Depth Accuracy |
±4%, nominal |
|
FM Measurement |
|
|
Frequency Range |
100 kHz to 1.5 GHz |
|
Modulation rate |
20 Hz to 100 kHz |
|
Modulation Rate Accuracy |
1 Hz, nominal <0.1% modulation rate, nominal (Modulation rate ≥ 1 kHz) |
|
Deviation |
20 Hz to 200 kHz |
|
Deviation Accuracy |
±4%, nominal |
|
Inputs and Outputs |
|
|
RF input connector |
50 Ω，N-type female |
|
track generator output |
50 Ω，N-type female |
|
External trigger in |
BNC female |
|
10 M reference input/output |
50 Ω，BNC |
|
Interface |
USB HOST, USB DEVICE, LAN, earphone port, |
|
General techincal specification |
|
|
Display |
8 inches touch screen LCD |
|
Weight (without package) |
About 2.5 kg |
|
Dimension (W × H × D) |
265mm*190mm*58mm |
|
Working temperature |
0~40 ℃ |
|
Storage temperature |
-20 °C to +60 °C |
|
Power |
100V~240V 50/60Hz |
|
Battery |
7.4V 9100mAh |
